Treating one nest and calling it done is how a wasp problem comes back in three weeks. Our technicians in Burlington inspect the full property for all nest types -- including the ones inside walls, in the ground, and in trees the customer never noticed.

Protective protocol matched to the threat level of the specific nest type.
We inspect the full property before treating any individual nest: all eave lines, soffit vents, gable ends, visible tree branches, ground areas within 20 feet of the structure, wood pile edges, and landscape features. Secondary nests are standard, not exceptional -- most properties with an active wasp problem have 2 to 4 nesting sites.
Every technician dispatched for wasp removal carries full protective equipment and species-specific treatment tools. The protective protocol is not the same for a small paper wasp eave nest as it is for a large yellow jacket ground colony. We size the response to the threat.
Void nests are the most frequently mishandled wasp situation. Spraying the entry point collapses the guards but does not reach the nest itself. We treat void nests from the inside, targeting the nest chamber directly before sealing the cavity against recolonization.
After nest elimination, we apply a residual treatment at the nesting site -- eave boards, ground nest entrance, void entry point -- that prevents new queens from establishing a colony at the same location next season. Wasps show strong site fidelity and will return to previous nesting locations if no residual barrier is present.
Paper wasps in Burlington, WI are the species most frequently called about but least likely to represent a genuine safety emergency. Their open-comb nests under eaves and window frames are easily visible and often alarming in appearance, but the colony is relatively small and the wasps do not attack unless directly provoked. The key distinction from yellow jackets is the open hexagonal comb -- paper wasps do not enclose the nest in a paper envelope. A paper wasp nest that is not near a high-traffic area can often be monitored rather than immediately treated, but one near a door, a play structure, or a walkway where physical contact is possible should be removed professionally. The colony dies naturally in fall, but the nesting location should be treated with residual product to prevent re-establishment next season by a new queen.
Yellow jackets are a fundamentally different threat category than paper wasps. They are highly social, produce large colonies -- 3,000 to 5,000 workers or more by late summer -- and become extremely defensive within 20 feet of the nest entrance. Yellow jackets do not give a visual warning before stinging, do not sting once and release like bees, and can sting repeatedly. A disturbed yellow jacket ground nest produces a mass defensive response that can overwhelm a person retreating from the nest site, particularly if the person does not know the nest entrance location in advance. Ground nests are particularly dangerous because the entrance is frequently not visible until approached -- it may be a small hole at the base of a landscape feature, in a lawn edge, or between pavement slabs. Yellow jackets in Burlington, WI do not reliably die off in mild winters -- colonies that experience only moderate cold may survive into the following season with a surviving queen and many workers, allowing the colony to reach much larger populations than typical first-year colonies.
Bald-faced hornets are a yellow jacket relative -- technically a wasp -- that builds the large, gray, papery football-shaped or teardrop-shaped nests visible in trees, attached to structures, and sometimes on utility poles or equipment. Despite their distinctive appearance, many people do not recognize bald-faced hornet nests and attempt to knock them down with a spray can from a short distance. This is consistently dangerous. Bald-faced hornets are highly aggressive within several feet of the nest and will pursue a perceived threat away from the nest site -- they do not limit their defensive response to the immediate nest perimeter the way paper wasps do. A large bald-faced hornet nest can contain 400 to 700 workers by late summer. Treatment requires approaching from a downwind angle at maximum application distance with appropriate protective equipment -- it is not a situation where proximity with a standard spray can is safe for an unprotected person.
Wasps entering your walls or soffits in Burlington? Call +1-866-315-0243. Our technicians in Burlington respond fast to active nest situations -- especially near entry points and children's areas.
The most problematic wasp situation from a DIY treatment standpoint is the void nest -- a yellow jacket colony established inside a wall void, soffit cavity, or attic space. Void nests are identified by a consistent entry point through a gap, crack, or opening in the exterior of the structure -- typically a wood joint, a gap in vinyl siding, or an opening around a pipe or conduit penetration. The number of workers entering and exiting the entry point is a reliable indicator of colony size and maturity. A large void nest may have a substantial buzzing sound audible from inside the adjacent room. Spraying the exterior entry point with consumer knockdown spray addresses only the guards at the entrance -- it does not reach the nest chamber inside the void, and it agitates the colony while leaving the population intact. The workers inside increase their defense activity, and the colony may begin exiting through secondary entry points deeper in the structure. The correct approach is void injection -- applying insecticide directly into the nest chamber through a small access point -- followed by sealing the primary entry after the colony is eliminated.
Fall is the appropriate window for preventive treatment at high-risk nesting sites -- eave boards where repeated nesting has occurred, attic gable vents with a history of yellow jacket activity, and ground nest entrance areas from the current season. Queens that mated in late summer overwinter in sheltered sites and re-establish nests in spring, showing strong fidelity to previous nesting locations. A residual product applied to former nesting sites in late fall -- after the colony has died or been eliminated -- deters new queen establishment in spring when queens begin scouting for nesting locations. This preventive application is especially effective for properties that deal with recurring annual nest establishment at the same location, which is a consistent pattern when the post-season residual is not applied. The cost of preventive fall treatment is a fraction of the cost of reactive season treatment.

Same-day response for active wasp and hornet nests in Burlington. Call and we confirm arrival before you hang up.
Call +1-866-315-0243Six services covering every nest type and situation -- from paper wasp eave removal to yellow jacket void injection.

We sweep the full property before treating any individual nest -- all eave lines, soffits, gable ends, tree branches, ground areas, wood pile edges, and landscape features. Secondary nests are found and treated the same visit.
Open-comb paper wasp nest removal from eaves, window frames, door frames, porch ceilings, and fence structures. Residual applied to the nesting site after removal to prevent next season's queen from re-establishing.
Ground nest treatment with full protective gear, correct product application to the nest interior, and entrance sealing to prevent reuse.
Professional treatment from safe application distance with full protective gear. The gray enclosed nest is a high-aggression situation -- correct approach and distance are required.
Void injection, entry sealing, and structural assessment -- the complete protocol for wall and attic yellow jacket colonies.
Applied after the current season's colony dies off or is eliminated. Prevents next year's nest at the same location.
Threat assessed, all nests located, treated in correct sequence, residual applied.
Species and location described on the call. Threat level assessed. Arrival time confirmed.
Full bee suits, extended-reach application equipment, and species-specific products. The protective protocol is matched to the nest type described on the call -- not a one-size approach.
We find all of them. The nest you called about and the ones you did not know about are both on the treatment list.
All nests treated, all sites residual-treated. Documentation left on-site. Follow-up timing confirmed.
Three situations -- including a bald-faced hornet nest DIY attempt and a void nest a previous contractor missed.
I found the ground nest when I was nearly on top of it. Called Show Me Pest Control immediately. Same-day service on a Sunday. Technician found two additional nests during the sweep. Every nest treated. No stings at pickup the next day.
Attempted to spray what I thought was a wasp nest. Got stung 11 times before I got back inside. Show Me Pest Control identified it as bald-faced hornets -- a completely different threat level than I understood. Treated correctly. Inactive within 15 minutes. I had no idea there was such a difference between nest types until this happened.
Customers were getting stung at the front entrance of my business from a nest nobody could find. A previous contractor sprayed the outside of the soffit repeatedly with no result. Show Me Pest Control accessed the void from the attic, identified the nest in the cavity, treated directly, and sealed the entry. Zero customer stings the following season.

Ground nest, aerial nest, or void nest in Burlington -- same-day dispatch, full protective equipment, complete property sweep.
Call +1-866-315-0243 -- Same Day